 |
| |
|
|
If you are having problems watching the videos or they are not displayed at all, you will need to install flash player.
Software: TrueMill in SURFCAM Velocity
Material: Titanium 6Al4V
Spindle Speed: 3438 RPM
Programmed Feedrate: 115 IPM
Cutting Tool: 1/2" Dia Carbide Endmill - Swift-Carb
Axial Depth Of Cut: 1 In. | 25.4mm
|
TRUEMill Advantages Videos Click on the image or text to get access to the corresponding one.
SURFCAM, TRUEMill, and Surfware are registered trademarks of Surfware, Inc. Copyright 1990-2010+, Surfware, Inc. All rights reserved.
Surfware, Inc. 100 Camino Ruiz, Camarillo, California 93012, USA
Toll free: 800-SURFWARE (787-3927), Phone: (818) 991-1960, Fax: (818) 991-1980
Sales Inquiries: sales@surfware.com